In this quick guide I will show you how to connect the antenna to the receiver in raft. This process is rather simple and DOES not involve building very high. This whole thing can be achieved without much difficulty.
You need to build roughly two blocks high to achieve this, and place the receiver around 3 – 4 blocks away from the antennas on the same altitude (no higher than each other). You’ll be 3 antennas in all. Place them around 3 blocks away from each other (give or take) to connect them all to the receiver. I’d recommend using the battery sparingly, as it took me around several minutes to get to the location, and I ran through a few battery. Taking in and out MIGHT be effective. Also, don’t abandon your raft at the end. Anchor up. The wind can push you back and away, so be careful.
Sub here (づ｡‿‿｡)づ http://yt.vu/c/UCPH28MUR1-Ko5tRQuJf3zmw
——————————————————————————————————-
Find the discord server here (づ｡‿‿｡)づ https://discord.gg/gZWsb9f
——————————————————————————————————-
Any comments? Just drop them! I reply pretty quick. (｡‿｡)
——————————————————————————————————-
Music that may have been used in this production is provided by Kevin Macleod of incompetech.com
Take the opportunity to connect and share this video with your friends and family if you find it useful.
No Comments